Brinell Tester with Load Cell (900-355)

Product Description

Innovative closed-loop technology from Phase II. The tester incorporates the latest load cell technology. The test load is applied via a closed-loop control unit with a load cell, a DC motor and an electronic measurement and control unit. The result is highly accurate Brinell hardness measurements at all test loads up to 0.5%. The common load overshoot or undershoot as known from traditional dead weight, or open-loop, systems is eliminated. The absence of mechanical weights not only eliminates friction problems but also makes the equipment less sensitive to misalignments caused by vibrations.

5yr-Warranty

Features:

Load Cell driven system provides precise control of test force application
Direct digital reading
Engineered to obtain highly sensitive and accurate readings
Perfect for laboratories, workshops, tool rooms, inspection labs, etc.
Measuring Range: 8-650HBW

Specifications:

Innovative closed-loop technology. The Brinell hardness tester incorporates the latest load cell technology. The test load is applied via a closed-loop control unit with a load cell, a DC motor and an electronic measurement and control unit. The result is highly accurate Brinell hardness measurements at all test loads up to 0.5%. The common load overshoot or undershoot as known from traditional dead weight, or open-loop, systems is eliminated. The absence of mechanical weights not only eliminates friction problems but also makes the equipment less sensitive to misalignments caused by vibrations.
The whole weight of the tester is 50% less than the traditional dead weights type tester.
Test load selection by keyboard and LCD screen.
Fully automatic test cycles. The Brinell hardness Tester features a fully automatic test cycle, load application, holding, unloading, is performed fully automatically. This greatly improves reproducibility of test results since operator influence is eliminated.
Selectable dwell times by screen. The indenter, load, and other test information are shown clearly on the large LCD screen.
The directions for 0.102F/D2 ratios selecting according to the materials and hardness range can be showing on the screen.
Equipped with a 20X optical microscope to measure the diameter of Brinell indention.
Brinell Hardness Calculator (BHC) make the hardness value calculation easier and convenient.

Technical data:

Loads：3000kgf (29400N), 1500Kgf (14700N), 1000Kgf (9800N), 750Kgf(7355N),500Kgf (4900N), 250Kgf (2452N), 187.5Kgf (1839N), 125Kgf (1226N),100Kgf (980N), 62.5Kgf(612.9N)
Load dwell duration: 2s～99s, can be set and stored
Tungsten Carbide Ball indenter: 10mm, 5mm, 2.5mm
Measuring range: 8-650HBW
Magnification of the microscope: 20X
Resolution capability of the microscope: 0.005mm
Max measurable height: 230 mm
Max measurable depth: 140 mm
Dimensions: 530mm×260mm×750mm
Power supply: 220/110 V, 50/60 Hz, 4A Prior to ship, please advise power setting needed.
Weight: 110kg
Standard blocks: 125-350HBW10/3000, 125-350HBW10/1000